How-to

Needle Felting on Crochet and Knits: Faces, Details and Yarn Ends

Published

As an Amazon Associate we earn from qualifying purchases. This does not change our picks. Affiliate disclosure
New to Prime? Try Prime free for fast, free shipping on eligible items.

Gear for this job

All 7 picks compared
Spherical gray ball of thread and red crochet needle with magazine on beige wooden table in daytime on blurred background
Photo: Anete Lusina on Pexels

This page is for crocheters and knitters who want one felting needle for two jobs: adding eyes, cheeks or spots to amigurumi, and stopping yarn ends from working loose. Both depend on the yarn band more than on technique. A felting needle has barbs that push fibers into the fabric. Wool fibers have scales and lock where they are pushed. Acrylic and cotton fibers are smooth and only tangle a little. Check the fiber content first, then pick the needle and follow the steps for the job.

Needle felting on crochet: which yarns it works on

Read the yarn band of the piece you want to felt onto, then find the row. The yarn-end column draws on one published test, in which pairs of yarn ends were joined with a felting needle on a foam mat.

Yarn fibers that felt, one by one →

Which felting needle for crochet: size 38 or 40

Buy a size 38 if you want one needle. It is the medium all-rounder: its barbs are large enough to carry wool through the yarn and attach a detail, and fine enough for some detail work. A size 40 is finer, with smaller barbs. It tidies the surface and closes the holes a coarser needle leaves, which shows on a small face.

Skip the ends of the range. A size 36 is a coarse needle for building cores, and it leaves visible holes. A size 42 is very fine and, like the 40, bends and breaks most easily. The needle size chart lists every size by job, and the guide to felting needle sets covers assorted packs. Look for one that includes both a 38 and a 40.

How to needle felt a face detail onto amigurumi

You need a little wool roving or batting in the color of the detail and a size 38 and 40 needle. The steps describe a cheek. A spot, a muzzle patch or an inner ear goes on the same way.

  1. 1

    Stuff the piece firmly before you add details. The stuffing takes the needle tip, so no pad is needed. For a flat or unstuffed piece, put a foam pad under the fabric, never your hand.

  2. 2

    Pull off a small wisp of wool. For a cheek the size of a fingertip, start with less than looks right: felting packs wool down to a fraction of its loose size.

  3. 3

    Shape it on a foam pad first. Roll the wisp into a loose disc and stab it with the size 38 only until it holds together. Leave the underside fluffy, because loose fibers are what join it to the yarn.

  4. 4

    Hold the shape in place with your fingers to the side of it. Tack it through the middle with the size 38, straight in and straight out, just deep enough to reach the stuffing.

  5. 5

    Work around the edge, stabbing on the outline and slightly inward. Tuck stray fibers under the edge with the needle tip so the outline stays crisp.

  6. 6

    Change to the size 40 and go over the surface with shallow stabs until it is smooth and the holes close. Add 1 more thin layer if the yarn color shows through.

Note.Felting needles are barbed and very sharp. Watch the needle and keep the holding hand out of its path. Finger guards reduce needle sticks. They do not prevent them.

Needle felting eyes on crochet

A felted eye is a small dot of dark wool put on with the six steps above. A wisp of white, added with a size 40 or 42 needle, gives the highlight. Felted eyes can go on after the piece is finished and stuffed, so their position can be judged on the finished face.

On acrylic or cotton yarn a felted eye holds poorly. Use safety eyes or embroidery there. The guide to eyes for felted animals compares glass, safety and pin eyes. A felted detail can be pulled off with enough force, and this page makes no claim that one is safe on a toy for a baby or a pet.

How to secure crochet yarn ends with a felting needle

Felting backs up a woven-in end. It does not replace the weaving. The barbs tangle the fibers of the tail with the stitches around it, so the end cannot slide back out.

  1. 1

    Weave the yarn end through the back of the stitches the way you normally do. Leave the tail uncut for now.

  2. 2

    Lay that part of the work wrong side up on a foam pad. On a stuffed piece, the stuffing does the job of the pad.

  3. 3

    Stab along the woven-in end with a size 38 or 40 needle, straight in and straight out, from 2 or 3 directions.

  4. 4

    Tug the tail gently. When it no longer slides, cut it close to the fabric. If it still moves, stab along it again before you cut.

Joining a new ball: felting two yarn ends together

The same needle joins a new ball without a knot. One published tutorial overlaps the two ends by about 1.5 to 2 in (4 to 5 cm), lays them on a foam mat and stabs along the overlap, lifting and turning the yarn so it is felted from several sides. The join is done when the two strands look like one and do not pull apart. Rolling it between the fingers smooths it. For bulky yarn the tutorial thins each end to half its thickness first, so the join is no thicker than the yarn.

When felting on crochet or knits fails

Most failures trace back to the fiber, and the rest to how the wool was put on. Knits follow the same rules as crochet, with one difference: knitted fabric stretches, so lay it relaxed on a pad and do not pull it tight. The chart of fabrics for needle felting covers sweaters and other bases.

  • The yarn is acrylic or cotton. It has no scales, so the detail or the yarn end is held by a loose tangle and pulls out.
  • The yarn is superwash wool. Its scales are removed or coated. One tutorial joined superwash ends, but the result is not something to count on.
  • The detail was felted firm all over before it went on. With no loose fibers on the underside there is nothing to join it to the yarn.
  • The wool went on as one thick pad. It sits on the surface and stays fuzzy. Use thin layers.
  • The stitches are very open or lacy. As with an open weave, the wool has less to grip.
  • The piece gets washed. No source could confirm how felted details stand up to washing, so treat them as hand wash and test first.

Quick answers

Short answers for crocheters and knitters buying one needle. In every case the fiber content on the yarn band decides the result.

  • Which felting needle for crochet? A size 38 (38 gauge) as the one needle. Add a size 40 to smooth small face details.
  • Does a felting needle for crochet ends work on acrylic? No. In one published test, acrylic and mercerized cotton ends did not hold.
  • How to needle felt on crochet without a pad? Stuff the piece firmly first. The stuffing takes the needle tip. Flat pieces need a foam pad.
  • Is a felting needle for knitting any different? No, the needle is the same. Knits stretch more, so work on a pad with the fabric relaxed.

What you need for this

Sources